By using the new compact DUOPAD® control panel, it is now possible to easily install and control two instruments: the DEFINITIVE®LED electric brushless micromotor and the TITANUS®E piezo-electric scaler (or another instrument).
The DUOPAD control box is meant to be easily fixed to the existing dental Unit’s frame and can be directly connected to the BMC40 and/or USC60 electronic boards. Commands and information are exchanged and transmitted via the integrated RS232 serial port. Information on the status of the active instrument is clearly displayed on the LCD graphic interface.
By means of the soft-touch keyboard, it is possible to choose the instrument and select the appropriate operating mode.
If the micromotor is selected, it is possible to adjust speed and direction mode. It is also possible to select the gear ratio of the used contra-angle handpiece: the real output speed is therefore worked out and displayed on the LCD.
If the scaler is chosen, it is possible to select the normal/perio/endo mode and adjust output power correspondingly.
Max. Consumption | 22 mA |
Compliance | CEI EN 60601-1-2 |
Supply Voltage | 13 Vdc ± 20% |